Where does this hose go??

[SpunkyE30nOk]

For those with a second gen m30 *e23,e28* where does the hose that attches to the housing #11 in the realoem picture connect to? Is it to the heater core? My dumbass didn't take pictures when i pulled the motor now i dont know where it goes to. If its to the heater hose is it the inlet hose? I have no clue, I have a bentley manual for the e28, but my motor is out of an 86 e23 7 series. Any help would be appreciated!

http://www.realoem.com/bmw/showparts.do?model=6724&mospid=47192&btnr=11_0191&hg=11&fg=15

thanks brian

[JoeMadoo]

I would imagine it goes to the inlet hose so the heater core gets the hottest coolant. I don't know exactly i have the later m30.

[SpunkyE30nOk]

I would imagine it goes to the inlet hose so the heater core gets the hottest coolant. I don't know exactly i have the later m30.

yea i was thinking it was the inlet house I'd have to run a house to the other side of the motor b/c im retaining the m20 heater core. btw did you get my paypal i sent ya??