Strange intake boot

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TwistyTunedE30
    E30 Addict
    • Jan 2005
    • 499
    #1

    Strange intake boot

    Hey all, just another question about my semi finished swap. I was replaced one of the heater core hoses that blew on the back of the motor(ofcourse the rear had to go) when i realized my intake boot looked retarded. What the hell is the white protrusion across from the ICV? Im pretty sure this is not the correct boot for the motor and maybe this could be causing some of my problems. Thanks

    Tags: None
    • chuck90m3
      E30 Addict
      • Dec 2003
      • 568
      #2
      it is an early model boot that used a air valve
      Attached Files
      "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

      Friedrich Nietzsche

        Comment

        • TwistyTunedE30
          E30 Addict
          • Jan 2005
          • 499
          #3
          Awesome chuck, good catch. As far as I can tell its not sucking any air in, but would it cause a problem if it wasnt attached to anything? Maybe under vac its sucking in air
          Thanks again
          -Max

            Comment

            • chuck90m3
              E30 Addict
              • Dec 2003
              • 568
              #4
              no problem. the boot you want is from a late model M30 out of a e32 7ser or a e34 5ser. these cars will have a later version of the EVAP system
              "A casual stroll through the lunatic asylum shows that faith alone does not prove anything."

              Friedrich Nietzsche

                Comment

                Previous template Next
                Working...