what else i need i need for the m30 swap.

[e30_kid89]

If you weren't in Canada it would only cost about $65 with UPS ground to ship a transmission. I shipped a 4HP22 for a little more than that and it was 110lbs!

Edit: If you decide to ship let me know, I need a transmission for a 335i I'm building for a friend.

I'm willing to ship as long as the buyer is willing to pay for shipping and stuff.

The OP pm'ed me so we'll see what happens. If it falls through i'll let you know if you're intrested. I'll even include a clutch/PP with it as well.

[euroshark]

Definitely interested if it falls through, just keep me posted... I'm gonna need one either way!

[xxx-Lost-Soul-xxx]

That site is good, But he looks like he went threw alot of headacts to get what he needed.

1989 635 motor (b35)
260/6 OR 260/5 still looking
1989 ecu
Harness "still looking"
325E driveshaft :looking
FUNK MOtor mounts
1990 735i oil pan
85 535i radiator
e32 headers "working on it"

[RickSloan]

you should really try to find a harness for an 89 635csi its your best bet and i can give you the exact wiring cause i already did it. That was honestly the biggest question for me.

And he did go thru a ton of head aches but the rest of us learned from that and posted many many threads about it. All you need to do is read every thread you can find and you will find that those headaches have been amended and solved.

and i have an M10 trans for sale that will work but your drive shaft situation would be a little different, cause its shorter. But this trans WILL hold up to the M30. I need to unload it and it can be had at a decent price. Euroshark that offer goes out to you as well my friend if you are interested.

[xxx-Lost-Soul-xxx]

you should really try to find a harness for an 89 635csi its your best bet and i can give you the exact wiring cause i already did it. That was honestly the biggest question for me.

And he did go thru a ton of head aches but the rest of us learned from that and posted many many threads about it. All you need to do is read every thread you can find and you will find that those headaches have been amended and solved.

and i have an M10 trans for sale that will work but your drive shaft situation would be a little different, cause its shorter. But this trans WILL hold up to the M30. I need to unload it and it can be had at a decent price. Euroshark that offer goes out to you as well my friend if you are interested.

The guy who has the 635 motor sold the harness, I just got a email from a seller who has a 87 325i HARNess he will sell me.

IM gonna pm you about the tranny. Euro shark & i Are talking about my 265 he may pick it up from me.

[wildstoats]

Get in line for the driveshaft :p . I'm about to bite the bullet and just buy a refurbished unit.