Finally after months and months and months of waiting on this part waiting on that part. So happy to finally have this car running, little part background.
VAC Mild cams(279/276duration 11.5mm lift in 10.95mm ex) +1 SS valves, VAC springs and retainers. Bottom end is nearly stock outside of a new set of rod and main bearings, since original crank was scored(f'n thrust surface) I had the thrust professionally welded and nitrided. Factory header, plus modified 2->1 into a 2.5" all the way back through a vibrant highflow cat and a dynomax superturbo muffler.
VAC Mild cams(279/276duration 11.5mm lift in 10.95mm ex) +1 SS valves, VAC springs and retainers. Bottom end is nearly stock outside of a new set of rod and main bearings, since original crank was scored(f'n thrust surface) I had the thrust professionally welded and nitrided. Factory header, plus modified 2->1 into a 2.5" all the way back through a vibrant highflow cat and a dynomax superturbo muffler.
Comment