just replaced engine no start
so i just replaced the engine in my e30, no start and it spins slowly or not at all. the battery is good and ive doubled checked the connections that i removed when i replaced the engine harness. there are only four. the three on the terminal post the ground for the coil pack the ground from engine to chassis on the passenger side. im stumped ive checked the voltage at the terminals and starter they register 13.4. seems like the issue is a ground somewhere, any ideas are much appreciated
-
Strategic nw e30 commandOriginally posted by bmwm42 -
no power to main relayStrategic nw e30 commandOriginally posted by bmwm42 -
will yours start at all? or is it just turning over?Comment
-
Just turns over slowlyStrategic nw e30 commandOriginally posted by bmwm42Comment
-
she lives thanks for the help bitchesStrategic nw e30 commandOriginally posted by bmwm42Comment
-
what was it???sigpic
New website releasing soon www.gutenparts.com Guten Parts + Service | Facebook | Twitter
____________________________________
Levent
%20levent@gutenparts.com
____________________________________
Ladies:
1998 E36 m3/4/5 1988 325i 1989 325iTComment
-
ignition harness connections going to the coil pack were backwards swapped them and the princess fired right up.(the wires going to the spark plugs were correct)Strategic nw e30 commandOriginally posted by bmwm42Comment
Comment