Aftermarket Intake setup

[1Bad67]

Stock intake.
Then crank this on the stereo.

[S13_E30]

those guys bust a lot of myths, they did one for the electric supercharger one.

[bmwm42]

get an aem dryflow and then make it fit good and call it a day

OR drill the airbox. Drilling airbox sounds the same.. did it to my car. Way noticeable sound difference at WOT

gtfo out of my m42 section bitch i can barely stand you in the pnw section, yet alone having to read your bullshit here

[mr.vang]

[5Toes]

get an aem dryflow and then make it fit good and call it a day

OR drill the airbox. Drilling airbox sounds the same.. did it to my car. Way noticeable sound difference at WOT

[bmwm42]

^yes ma'am

[Vivek]

if i remove the plastic tubing on mine its more noticible

The one to the headlight housing area?

[freeride53]

This for the FUH RETARD. BMW OEM Intake is the best choice, for the engine's sake.
A fresh oem filter in the oem box will always be the best, however this is R3v.

[bmwm42]

Are there any intakes that you can noticeably hear that also help performance?

if i remove the plastic tubing on mine its more noticible

[Massimo]

No but I have a loud exhaust it made the exhaust note slightly deeper.

[Vivek]

Are there any intakes that you can noticeably hear that also help performance?

[bmwm42]

^this is what im running and you can barely hear it at wot

[M3Philipp]

have the KA motors intake it is by far the best I have ever had even noticed a increase in torque.

the only picture I have of it

Does it change the sound of the engine alot?

[Simon S]

This is the aftermarket intake setup I dream about..

[vpilarrt]

Mine's not a dismembered OEM airbox. Its an aftermarket heatsheild that someone used to make and sell here on R3V.