Fuel Rail removal (m42)

[dudecati]

Hi All - I'm doing the 'mess under the intake' mod and am also upgrading my injectors. I have the lower intake off with the injectors & fuel rail still connected. I have removed the two nuts holding the rail but cannot figure out how to get the rail off. Here is a pic of where I am at:



For some reason it isn't liking my link to my pic so here is the link -http://www.flickr.com/photos/dudecati/8568166851/

Can someone please point me in the right direction? I don't want to break anything so for a change I am asking first!

Thanks!

[vpilarrt]

The seals on the injectors are usually really tight, especially if they haven't been removed in a long time (or ever). Pry, twist, keep working at it.

[jlevie]

Spraying PBlaster or Kroil on the seals helps.

[dudecati]

Thanks for the responses - the PBlaster made a big difference.