Cheap motor mount option

[maxmonster]

Hey guys I just wanted to share this with everyone, if you guys don't want to splurge on OEM mounts these are a viable option.

http://www.rockauto.com/catalog/moreinfo.php?pk=3460080

I just actually installed these on my car today. If you do some research on the web, very little info comes out. But I will say, after install, I turned on the car, and did not feel any vibration from the engine inside the cabin at first I was very confused then amazed. Drove around the block just to make sure everything was cool. For 47 bucks I am amazed at how well these actually dampen engine vibration. Will drive around more and keep you guys updated.

NOTE: There is some modification needed on these mounts just have to cut off part of the nipple on the bottom of the mount but that's easy peasy. Took me longer to figure out how to loosen the passenger side top nut...

[roguetoaster]

Interesting, please do keep us updated.

When I looked I only saw the part below, and it was only $15.53. Only 14 of these in stock, perhaps I ought to try a set.

http://www.rockauto.com/catalog/moreinfo.php?pk=6324579&cc=1011249&jnid=446&jpid=1

[irish44j]

I have one of those (the cheap ones ^^ ) in the rallycross car. It's held up fine over parts of two seasons (the one on the other side is a solid Condor mount - don't ask why I have two different ones, there is a reason ;) )

[Jeff2886]

Cool stuff! I've got 5-series mounts in the E30 - they were cheaper than harder poly-mounts