new clutch

[Sponce]

i am puting in a new clutch and flywheel, and wanted to know if anyone has any advise aboput how to go about it, or on any parts i might need to replace while i am at it?

[Jak]

Its pretty straight forward. Try to get all the tools you'll need before you start. I just helped a buddy with his E36 318is and the starter was a real pain, not so much on E30s though. Are you replacing with stock components?

[buhnah7]

throwout beering, might need replacing, only thing i can say is get someone to help you and make sure when you put things back together they are torqued to factory specs

[Hick]

replace input and output shaft seals, selectorshaft seal.

[Sponce]

yeah, i got a new clutch, preasure plate, and throw out bering, and i also got a used flywheel, and i am going to get it turned. but i just wanted to make sure there are not other parts i might need, cuz i dont want to gewt stuck in the middle needing a bolt or something like that.

[Hick]

if you are going to remove the flywheel, since you seem to have a newer one, replace the [8] bolts, they are not reusable

[Sponce]

ok, i didnt know i could not reuse them.