m42 oil weight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • johnwoo
    Mod Crazy
    • Oct 2007
    • 613

    #1

    m42 oil weight

    i know this has been asked, but i just wanted to confirm. the bentley says to use 15w50 oil but i read in some post that the m42 prefer 20w50, any confirmations on that? just wanted to know before i go and buy 5 quarts of the wrong weight, thanks.
  • dtdub
    Noobie
    • Nov 2007
    • 34

    #2
    I just filled up with Mobile1 full synthetic 15w50. I'd tend to trust the info in the Bentley, but realistically, there's probably no noticeable difference between 15w and 20w.
    www.SpitfireEFI.com Custom Megasquirt ECU's
    sigpic
    '91 318is

    Comment

    • johnwoo
      Mod Crazy
      • Oct 2007
      • 613

      #3
      cool thnks.

      Comment

      • DCColegrove
        Banned
        • Dec 2007
        • 2748

        #4
        20w50 is NOT recommended in an M42 (or any other DOHC BMW engine) it will starve the HVAs (lifters) 10w30 or 40 is fine for the M42 (latter DOHC engines require 5w30).

        I strongly recommend synthetic

        15w50 is also fine however in cold weather it will also starve the HVAs)

        Comment

        • 808AWD325xi
          Grease Monkey
          • Sep 2007
          • 359

          #5
          My dealer recommended 15w40. They advised against synthetic as it would most likely cause oil leaks that did not exist today with the thicker dino oil.
          Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms/OFT

          Comment

          • johnwoo
            Mod Crazy
            • Oct 2007
            • 613

            #6
            ok doing the oil change now. where in the world is the oil filter. the bently shows it but i can't find it on my 318 is. where in the world is the oil filter.

            Comment

            • 808AWD325xi
              Grease Monkey
              • Sep 2007
              • 359

              #7
              Originally posted by johnwoo
              ok doing the oil change now. where in the world is the oil filter. the bently shows it but i can't find it on my 318 is. where in the world is the oil filter.
              Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms/OFT

              Comment

              • johnwoo
                Mod Crazy
                • Oct 2007
                • 613

                #8
                where is that in reference to everything i.e. drivers side passenger side?

                Comment

                • LovableSheep
                  Wrencher
                  • Dec 2007
                  • 246

                  #9
                  Originally posted by johnwoo
                  where is that in reference to everything i.e. drivers side passenger side?
                  Oil filter housing is on the driver's side, forward section of the engine.

                  Comment

                  • 808AWD325xi
                    Grease Monkey
                    • Sep 2007
                    • 359

                    #10
                    It's about dead center. When viewing the engine bay from the front left (drivers side) quarter panel, the filter housing is directly behind the radiator fan, next to the red dipstick handle.

                    Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms/OFT

                    Comment

                    • johnwoo
                      Mod Crazy
                      • Oct 2007
                      • 613

                      #11
                      thanks i found it and got the old cardtridge out. does anyone have the parts number for the cartridge and the seals.

                      Comment

                      • johnwoo
                        Mod Crazy
                        • Oct 2007
                        • 613

                        #12
                        also so what is the opinion on synthetic and dino? yeh or ney. i've heard so many sides to it. my first introduction to bmw so im not sure what to use.
                        i know in my older cars i just stik with dino oil

                        Comment

                        • 808AWD325xi
                          Grease Monkey
                          • Sep 2007
                          • 359

                          #13
                          Originally posted by johnwoo
                          thanks i found it and got the old cardtridge out. does anyone have the parts number for the cartridge and the seals.
                          11-42-1-727-300
                          Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms/OFT

                          Comment

                          • johnwoo
                            Mod Crazy
                            • Oct 2007
                            • 613

                            #14
                            Originally posted by 808AWD325xi
                            where did yo get this info from? its not in my bentley.

                            Comment

                            • 808AWD325xi
                              Grease Monkey
                              • Sep 2007
                              • 359

                              #15
                              Originally posted by johnwoo
                              where did yo get this info from? its not in my bentley.

                              It's from the BMW E30 repair manual.

                              This website is for sale! ee1394.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, ee1394.com has it all. We hope you find what you are searching for!
                              Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms/OFT

                              Comment

                              Working...