M42 issues....please help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • smonkbmw
    replied
    Originally posted by BBY1104
    I didnt have the means to check nor the time with the new job.
    lol, did you forget you posted this before the picnic, that was over 2 weeks ago, you bragged on here about starting the new job this week. your car had been sitting for over 2 weeks. you had plenty of time, its just easier for you to take up bandwidth and post on here than look at your car.

    Leave a comment:


  • Van Westervelt
    replied
    I told you to check the crank and cam sensors originally numb nutz.

    Leave a comment:


  • BBY1104
    Guest replied
    Im not dumb, I didnt have the means to check nor the time with the new job.

    Still keeping this thread alive for future problems

    Leave a comment:


  • smonkbmw
    replied
    Originally posted by atomic
    lmao, oh so official!

    Leave a comment:


  • atomic
    replied
    Originally posted by BBY1104
    Guess what? The PO took it to munich motorworks and then could not fit the cranks sensor so the used a different bolt and glued it in??? I was hella pissed but the took car of it for me.

    ANd yes Jeff I rubbed it in their faces. If you would stop kicking me in the ass to get shit i would get NOTHING done. Thanks Proffesor!

    GO HERE...

    Leave a comment:


  • BBY1104
    Guest replied
    Yoda?






    lmao

    Leave a comment:


  • atomic
    replied
    Originally posted by BBY1104
    Guess what? The PO took it to munich motorworks and then could not fit the cranks sensor so the used a different bolt and glued it in??? I was hella pissed but the took car of it for me.

    ANd yes Jeff I rubbed it in their faces. If you would stop kicking me in the ass to get shit i would get NOTHING done. Thanks Proffesor!

    “Happens to every guy sometimes this does”

    Leave a comment:


  • BBY1104
    Guest replied
    Guess what? The PO took it to munich motorworks and then could not fit the cranks sensor so the used a different bolt and glued it in??? I was hella pissed but the took car of it for me.

    ANd yes Jeff I rubbed it in their faces. If you would stop kicking me in the ass to get shit i would get NOTHING done. Thanks Proffesor!

    Leave a comment:


  • smonkbmw
    replied
    so youre gonna tell your parents to shove it right? you know the ones that said you cant take your car to a shop until you replace the fuel filter?

    Leave a comment:


  • BBY1104
    Guest replied
    GUESS WHAT, FUCKING PO IS A DIPSHIT!!

    I take it to pacific motorsports and they said to me:

    Crankshaft position sensor was a little bad so replaced it for me, and the bolt holding it in was in the wrong place? Wasnt timed properly at high RPM's and would stall the engine.

    I need a coolant flush/oil change

    O2 sensor could use a change but it isnt bad yet, lady said it was "tired"

    Looks like I gotta go order some parts now

    Leave a comment:


  • EN318isPDX
    replied
    I have a buddy who works there so i got it at a discount. $222.. same price as rock auto for the bosch
    Last edited by EN318isPDX; 06-20-2008, 12:28 AM.

    Leave a comment:


  • BBY1104
    Guest replied
    How much was the fuel pump? 300+ ?

    Cause BMA has them for 245 I think?

    Hopfully this shop can tell me whats wrong so I can just get parts.

    I need a new sender as well, lol Gas Gauge is way screwed up

    Leave a comment:


  • EN318isPDX
    replied
    Originally posted by BBY1104
    thanks, and rockauto is the shit stuff is so cheap :)
    hell ya! i actually got my fuel pump from rasmussen in portland. i live out on the westside.

    Leave a comment:


  • smonkbmw
    replied
    only person i know on this planet that has $450 credit at a decent repair shop and still after almost 2 weeks hasnt taken his car to it. instead posts about it on the internet while the car sits unfixed.

    Leave a comment:


  • BBY1104
    Guest replied
    thanks, and rockauto is the shit stuff is so cheap :)

    Leave a comment:

Working...