Dyno Results

[Frankiez]

153hp (crank) and 198Nm torque. I have dyno charts, but not in electronic format.

Mods Xtreme-chip from Ebay and throttle heater delete.

[Schnitzer318is]

it put down 128hp and 115 ft lbs.

Very nice... my 91 318is put down 122hp and 108 ft lbs. This was with a Mark D and Delta regrind cams. I have a Pro Formance chip in it now from ebay and want to have a dyno run with my new injectors. Previous dyno showed running lean throughout the run.

[E30nate]

ask your teacher for a soft copy of the data -- you can download winpep from dynojet and analyze the data, generate graphs, etc.

thats cool. i will ask him tomorrow.

can i email someone the pdf scan of the printout and heve them post it on here? i cant seem to figure it out.

[808AWD325xi]

its a dynojet. the printout say winpep 7. i dont know if that is the dyno or just the program. my teacher says they are one of the most accurate dynos around, though i dont know how much i believe him. he did guess the hp and tq numbers and was dead on though.

ask your teacher for a soft copy of the data -- you can download winpep from dynojet and analyze the data, generate graphs, etc.

[E30nate]

OP: what kind of dyno?

its a dynojet. the printout say winpep 7. i dont know if that is the dyno or just the program. my teacher says they are one of the most accurate dynos around, though i dont know how much i believe him. he did guess the hp and tq numbers and was dead on though.

[E30nate]

hey nate, off topic, but the cams are done and the car runs. sounds like a stroker v8 at idle. hopefully i'll get a video up soon. i recommend getting the cams done by that guy in shingle springs.

thats cool. unfortunately i dont have the money. i bought wheels and coilovers instead, but hopefully soon.

[Gooch]

I definitely need a Mark D. chip...

[smonkbmw]

OP: what kind of dyno?

[808AWD325xi]

So i got the chance to put my car on the dyno at school today, and i was quite impressed. my car is basically stock, with the exception of a pro formance ebay chip. it put down 128hp and 115 ft lbs. if i can figure out how to post a pdf file, i will post up the print out. i just thought it was pretty cool.

That's pretty good.

I put down 117whp and 114ft-lbs bone stock.

http://www.r3vlimited.com/board/showthread.php?t=106941

[KenC]

wow, thats awesome, we recently did Kishgs dyno, with 19lb injectors and a mark d chip and it put down 160~.

Just injectors and the chip and you're at 160 at the wheels? No way.

[ZM Blue Devil]

wow, thats awesome, we recently did Kishgs dyno, with 19lb injectors and a mark d chip and it put down 160~.

[dvmotorsports]

hey nate, off topic, but the cams are done and the car runs. sounds like a stroker v8 at idle. hopefully i'll get a video up soon. i recommend getting the cams done by that guy in shingle springs.

[sticksdaman]

holy crap! thats a strong motor

some b25s dont even put out as much

how significant of a change do you think the mounts made?

[EN318isPDX]

You would hope so! we do get these silly fluid filled engine mounts.. BMW really wanted to make 318is quiet little cars.

Alot of people think M42 mounts are really expensive..

Rockauto.com FTW

M42 motor mount
ÜRO PARTS Part # 11811141377 $21.79

M20 motor mount
HAMBURG TECHNIC OR MEISTERSTAZ Part # 11811132323A $6.62

[backtrail69]

I have OE tranny mounts and poly engine mounts on my turbo car. there is alittle more vibration, but its not bad at all. I can imagine a stock m42 is way smoother than my cammed m20 as well.