quick question?

[e30ballin]

is there a wrong way to put on an eta flywheel, you know the one with the flywheel tdc pins in them. im having problems with my flywheel rubbing on the reference sensors. im trying to figure what i did wrong:(

[e30ballin]

anyone???????

[e30ballin]

please i really need help!!

[HandalE30]

dont think theres a wrong way to put it in. but dont know how the R sensors get hit :s.... a quick solution would be to put a spacer (washer) between the sensor and the gearbox where it screws in. I did that same thing on my crank sensor because I had a longer sensor so used a nut in between and caught it with the screw. Hope it helps, Luck

[e30ballin]

dont think theres a wrong way to put it in. but dont know how the R sensors get hit :s.... a quick solution would be to put a spacer (washer) between the sensor and the gearbox where it screws in. I did that same thing on my crank sensor because I had a longer sensor so used a nut in between and caught it with the screw. Hope it helps, Luck

i was thinking that same thing a spacer, but i did not know if the sensors needed to be a certain distance. im just hoping i dont spend the $100 for sensors and watch the flywheel chew them up again