Axle rebuilding tips?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Maybe Magpie
    Advanced Member
    • Apr 2020
    • 162

    #1

    Axle rebuilding tips?

    Hi all. Redoing my rear suspension and welp, wouldn't you know it, the CV boots cracked during the process of removal. Shoulda expected it honestly but I'm going to try to tackle the job. I have the parts and tools in the mail for it (and I'll rent the three-jaw puller) but I had two questions regarding doing this:

    1. For one side of the axle, as shown in this video, you apparently have to crack open the plate that's NLA to get at that end's insides, and the guy had to use a punch to clamp it back down when reassembling. Is there a better/best way to do this?
    2. I don't have a parts washer. When cleaning the old grease out, is my best bet just a shitton of parts cleaner spray and a big bin? What's the best way to properly dispose of the resulting mess in a responsible manner?

    I'd also welcome any other advice. I've got the appropriate sized small-end boot clamps and diff output seals and o-rings and the axle retainers and bolts and all that jazz on the way as well.

    Thanks.
    i'm in love with german cars // gliding past me on the autobahn​

    stainless idols with silent hearts // never turning as we drift apart ♫ ​
Working...