get260 help.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • akinswonder
    Advanced Member
    • Nov 2009
    • 177

    #1

    get260 help.

    I just pulled my m20b25 from the car and I unbolted all of the bolts from the tranny. It's loose but it is not coming off. What else do I need to do. I have gone over everything to make sure I am not missing any bolts.
  • Wishno87
    R3V OG
    • Jul 2007
    • 6025

    #2
    There is a small bolt holding that thin piece of sheet metal between the tranny and motor.
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    Comment

    • akinswonder
      Advanced Member
      • Nov 2009
      • 177

      #3
      Wow, I think that may be the problem thank you.

      Comment

      • Wishno87
        R3V OG
        • Jul 2007
        • 6025

        #4
        My dad had the exact same problem a few days ago so your not alone.
        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

        Comment

        • akinswonder
          Advanced Member
          • Nov 2009
          • 177

          #5
          Good to know. I dnt feel as bad, lol.

          Comment

          • MR 325
            Moderator
            • Oct 2003
            • 37825

            #6
            Still might need to wiggle it around a bit to get it to pop out. That little bolt gets everyone though.
            BimmerHeads
            Classic BMW Specialists
            Santa Clarita, CA

            www.BimmerHeads.com

            Comment

            Working...