need help asap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yayforbrandon
    Member
    • Oct 2008
    • 86

    #1

    need help asap

    Okay so my car wont go into gear with car on. But when off it goes right in. If i start the car with it in gear it makes all sorts of weird noises and im just stuck. Please help
  • Van Westervelt
    R3V OG
    • May 2006
    • 9365

    #2
    When you start it in gear, with your foot on the clutch, does it stay running? And if so does it move with your foot on the clutch or does it sit still?
    sigpic

    Comment

    • yayforbrandon
      Member
      • Oct 2008
      • 86

      #3
      it stays running. and when i was sitting in the drive way with clutch in and the car running it felt like i was trying to go forward

      Comment

      • Van Westervelt
        R3V OG
        • May 2006
        • 9365

        #4
        Has anything been done to the car recently? Sounds like your clutch slave cylinder went tits up.
        sigpic

        Comment

        • yayforbrandon
          Member
          • Oct 2008
          • 86

          #5
          well i went to put a new clutch and flywheel in and did. but something didnt sound right with that being done so i went and put the old stuff back in. The slave that was on there before wasnt pressurizing at all so we put a new one on and its pressurized but now the car is being all funky

          Comment

          • Van Westervelt
            R3V OG
            • May 2006
            • 9365

            #6
            Have you driven it at all since you put the old clutch back in? If not, either you have a bad slave, or your clutch disc it backwards by the sounds of it.
            sigpic

            Comment

            • yayforbrandon
              Member
              • Oct 2008
              • 86

              #7
              well i was stupid enough to take the new pressure plate and put it on with the old clutch, which seems like it would be a problem in my book. but im not quite sure

              Comment

              • F34R
                sLaughter
                • May 2009
                • 12385

                #8
                Sounds like the slave, the old pressure plate should be just fine. I am running an OEM plate and having no issues.
                ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                Instagram: @BWeissLeather

                Current cars:
                ~ '87 325 M30B35 swap
                ~ '87 535
                ~ 01 540 Msport 6spd
                ~ '06 X5 4.8is

                Comment

                • 16v of E30
                  Banned
                  • Aug 2008
                  • 157

                  #9
                  sounds like you need to go to a mechanic instead of DIY

                  Comment

                  Working...