M20b25 Manual conversion - need list of flywheel parts

[AnnaB]

I have been assembling parts for a manual conversion of a 90 325i (airbag car). I have everything but the flywheel at this point.

Looking at the realoem.com display, there seems to a number of flywheel parts and I want to be sure I get everything I need.

I purchased the pressure plate/clutch from Ireland Engineering and noting the model year they said I should be using a single mass flywheel.

Can I get some advise on parts I'd need beyond the single mass flywheel and flywheel to crank bolts? For example, do I need the "shim" (item 10 in the realoem display) dustplate, etc. Also, what's the bearing+felt+caps (items 1-4) in the realoem display? I already purchased a pilot bearing but I wasn't clear if the felt+caps were required as well...

Thanks in advance for any help you can offer!

[scottb37]

as far as items 1-4 go disregard that. the new pilot bearings have dust shields so you'll be fine. yes you'll need the shim and make sure you get the right crank bolts, cuz the dual mass flywheel has longer bolts.

[AnnaB]

fantastic, thanks. love using this forum.