How toght should the bolts that attach the guibo need to be. I can fit a tourq wrench in there so ita hard for me to tell. I just am waery of over tightening it.
-
-
Size Grade Torque
M10 8.8 35 ft-lb (48 Nm)
M10 10.9 47 ft-lb (64 Nm)
M12 8.8 60 ft-lb (81 Nm)
M12 10.9 74 ft-lb (100 Nm)
from Pelican. -
Sorry i miss spelled, i can not fit a torque wrench in there, but it looks like its pretty tight. Should i just get it as tight as i can with a box end wrench?Comment
-
Put an open ended wrench on the back to hold it still, and use a torque wrench on the face. Done.sigpicComment
-
Good lord, you don't need a torque wrench.
Tighten them nice and tight, done.Comment
Comment