Flywheel question?

[Eurotrash727]

Okay so im about to pick up a 91 vert & the kid says it has the stroker style motor "2.7 bottom 2.5 head" But the problem is He says the Flywheel teeth dont meet the Teeth on the starter. He's been told he's using the wrong flywheel but he doesn't know what one to use im buying the car Dirt cheap So i really dont mind he says the car still starts but its just cause the starter has worn a grove in the flat area of the flywheel I wanna get this taken care of asap just wondering if anyone has came across this problem & can point me in the direction of the correct flywheel.

[Eurotrash727]

no one? new to the e30's any input is greatly appreciated

[MR 325]

no one? new to the e30's any input is greatly appreciated

You bump this thread after an hour and 20 minutes because nobody replied?

You should be using a single mass flywheel from an M20B25 i engine and a matching starter. Not sure how this guy couldn't figure that out. It's most likely a bullshit excuse anyway though.

[Eurotrash727]

You bump this thread after an hour and 20 minutes because nobody replied?

You should be using a single mass flywheel from an M20B25 i engine and a matching starter. Not sure how this guy couldn't figure that out. It's most likely a bullshit excuse anyway though.

lol sorry it had a few views.


Thanks for a answer sir.
Ill prolly be pulling the car apart tomorrow to see whats going on in there.