PPM Half Shafts, issues.

[Mr. Horsepower]

I have now fitted the PPM Half Shafts....aaaaaaand there is issues.

It started out very well, but after about two weeks I got a sound from the rear axle left side. Can be reminded of the sound when a small stone is stuck in the tire.

So I put my hand under the car and pulled the axles in and outwards. Resulting in that when I pull the axle against the hub it stops in something that makes the same type of knocking sound. And as far as I know that is not supposed to happen, I sill have the stock axles laying around so I thought of doing the same test on those.

Anyone experienced the same thing?
I'm really sure that I have mounted them correctly.

Pretty bad...Need to go to Nürburgring 9th of August :hitler:

[cabriodster87]

Double check flange bolts just to be sure they're tight, i had the same issue.

[Mr. Horsepower]

Ok, will do! I did tighten them to the correct torque, but I did not have any Loctite on.