Ideal SSK for E30? Not looking for big reduction
Collapse
X
-
e46 m3 is what i use, much better than the stock one, but still fells like a stock shifter should you dont notice it much unless you dive a shitty stock one then this right after or vise versa, also, they seem much easier/cheaper to get than the z3/z4 stuff -
AKG DTM.
shiny and expensive so you can tell all of your friends
I had a Z4M and hated it, a Z3 1.9 with delrin carrier bushings is about as good as it gets if you are on a budget.Leave a comment:
-
E30 m3 lever is slightly shorter and fully compatible. Z3 1.9 or e36 m3 lever is pretty short but somewhat notchy. Both are already bent like the e30 lever. Z3 1.9 is the most popular but the e36 m3 lever is about the same.Leave a comment:
-
I have a Z4 2.5 on mine and love it. I can't really give you a percentage, but the throw is def shorter than stock, and a bit notchy. The height of the physical shifter is much shorter too. If you have the harmonic balancer still on, you will need to grind the selector rod a bit. I hear no modification is necessary if your car has no balancer (mine did). In the pic it is shifted in second gear.
Leave a comment:
-
I use the Z3 1.9, about a 35% reduction. Requires bending if you want the stock position, I prefer mine a little forward.
There are a million threads
GL
LukeLeave a comment:
-
Ideal SSK for E30? Not looking for big reduction
Hi all,
What are some popular brand SSKs for E30? Im not looking to get the entire kit with arm and rod, but just the shifter lever. I have Autosolutions 30% kit installed on my e46, but I dont want to spend so much on my e30. The ideal kit in e46 version would be the BMW performance shifter (330d shifter). What are some similar "level" shifter I can get for my e30?Tags: None

Leave a comment: