Announcement

Collapse
No announcement yet.

Question about transmission fluid use.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Question about transmission fluid use.

    These had 17mm EXTERNAL wrenching oil plugs. If the label is green, use Redline MT90. If the label is red, use Redline D4 ATF. If there was no label, the gearbox will have 17mm INTERNAL wrench oil plugs, and should use Redline MTL GL-4 70W-80.
    My tranny has no label, but I used MT90 anyways, am I going to be having any problems? I really don't feel like draining it and pouring out all that $10 (or however much) I spent on tranny fluid.

    Thanks
    R.I.P 07/01/09 - 04/23/10 :(
    Tags: None
    #2
    isn't it 75w-90 for the internal 17mm drainplug?

    thats what i used.

    Comment

      #3
      Originally posted by T.Dot E30
      isn't it 75w-90 for the internal 17mm drainplug?

      thats what i used.
      That is correct. But I filled it with MT90 before I read about all this.
      R.I.P 07/01/09 - 04/23/10 :(

      Comment

        #4
        It will be ok. I actually don't like 75-90 redline in trannys, and it even says on the bottle not to use it in trannys.
        Adam Fogg- '88 M3

        Common sense- It's the new 'gifted'

        Comment

          #5
          I just use the Redline MTL in mine. Is does the 75-90 work better in our transmissions or something? No one else seems to use the MTL.
          -Brandon
          '86 325es S50
          '12 VW GTI Autobahn DSG
          '03 540i M-Sport (sold)
          '08 Jeep SRT-8 (sold)

          For sale:
          S50 TMS chip for Schricks

          Comment

            #6
            Originally posted by Beej '86 325es
            I just use the Redline MTL in mine. Is does the 75-90 work better in our transmissions or something? No one else seems to use the MTL.
            mtl right here no problems @ all.

            Comment

              #7
              I found a red label on mine today. Turner says that the ATF should be used in transmissions produced after 1/95. Can anyone explain why I should be using ATF in my manuel transmission?


              Thanks
              Jon
              Last edited by Schniddy; 04-15-2007, 08:59 PM.

              Comment

                #8
                no idea but im thinking of dropping mt90 in mine.

                Comment

                  #9
                  I found a red label on mine today. Turner says that the ATF should be used in transmissions produced after 1/95. Can anyone explain why I should be using ATF in my manuel transmission?
                  How about because that is what it is supposed to have in it. I'm not positive, but I think all BMW manual transmissions since the mid eighties use ATF as fluid. I know that the Getrag as found in E30's does.
                  The car makes it possible, but the driver makes it happen.
                  Jim Levie, Huntsville, AL

                  Comment

                    #10
                    Originally posted by jlevie View Post
                    How about because that is what it is supposed to have in it. I'm not positive, but I think all BMW manual transmissions since the mid eighties use ATF as fluid. I know that the Getrag as found in E30's does.
                    They phased it in from the late eighties until the 90s where they most all use it now.
                    Adam Fogg- '88 M3

                    Common sense- It's the new 'gifted'

                    Comment

                      #11
                      ok so i think i just bought the wrong fluid. I just bought ATF for my 91 g260, it has internal 17mm drain/fill plug. Will the ATF work or should i return it and get MTL instead?

                      Comment

                      Previous template Next
                      Working...
                      X