Hey guys, Im slamming away on the M20 swap on my 2002 and I am coming to the part of dealing with my transmission. I have to set up my shift linkage with part of my 2002 linkage, and the shift selector rod from the E30 that the trans came out of. That part is fine, but the shifter support is something that I need to sort out.
I have the later style tabs on the 260, but I want to use an early style mounting method with the two bolts. Problem is, as far as I saw the other day, the bolt holes arent tapped. It may seem silly but if I can indeed Tap them, what size should I use?
Stupid question I know, but any help would be awesome. If this works I can pound this linkage out pretty quickly and check another thing off the swaps to-do list.
I have the later style tabs on the 260, but I want to use an early style mounting method with the two bolts. Problem is, as far as I saw the other day, the bolt holes arent tapped. It may seem silly but if I can indeed Tap them, what size should I use?
Stupid question I know, but any help would be awesome. If this works I can pound this linkage out pretty quickly and check another thing off the swaps to-do list.
Comment