Looking for dimensions on the selector rod

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thatphysicsguy
    E30 Modder
    • Mar 2013
    • 843

    #1

    Looking for dimensions on the selector rod

    I tried looking on realoem, but I couldn't find any dimensions for the stock shift selector rod.

    I'm looking to make myself something similar to the uuc DSSR. I have access to a metal machine shop and cheap stock, but don't have $130 burning a hole in my pocket.

    Does anyone happen to have dimensions or a place to find them?

    Alternatively, if you send me a stock selector rod, I'll make you another copy of the dssr I'm designing. ;D
    '91 325i

  • jlevie
    R3V OG
    • Nov 2006
    • 13530

    #2
    Take the one off the car (easy to do) and measure the center to center distance of the pins and their diameter.
    The car makes it possible, but the driver makes it happen.
    Jim Levie, Huntsville, AL

    Comment

    • thatphysicsguy
      E30 Modder
      • Mar 2013
      • 843

      #3
      Originally posted by jlevie
      Take the one off the car (easy to do) and measure the center to center distance of the pins and their diameter.
      I have an auto car :[ going to swap it to 5 speed this spring and put in my homebrew DSSR then.
      '91 325i

      Comment

      • TheTacoMan
        R3VLimited
        • Nov 2011
        • 2308

        #4
        I have a broken one you can have if you want it.

        Comment

        Working...