If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I need to replace the rear output seal on the Getrag transmission on my E30. I have started removing the bolts on the drive shaft at the front flex disc. A few years ago, I had my exhaust system and drive shaft out. So I've torn out my drive line before. If I have to remove my exhaust and front drive shaft to replace the seal, I'll do it. But I sure don't want to. Will I be able to replace the output seal without removing the drive shaft or exhaust?
No, you have to pull the output flange that the drive shaft attaches to.
Comment