Announcement

Collapse
No announcement yet.

DIY: Rear Differential Swap?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    DIY: Rear Differential Swap?

    I searched and couldn't find anything. Is there a good DIY write up for swapping out the rear diff? I want to remove my 4.10 and install a 2.93 lsd I just bought in my 89 325is.

    Any help is appreciated!


    Thanks!

    SOLD: My feature http://www.stanceworks.com/2012/04/a...ss-bmw-e30-m3/

    #2
    Also interested in this. Haven't found anything any depth. Would like some helpful tips before I just up and try it one day.
    1989 Carbon Black 328is

    Comment


      #3
      It's one of the simplest jobs on the e30.

      Put the car on jack stands and take a look. Its just a nuts and bolts job.
      Originally posted by codyep3
      I hope to Christ you have looks going for you, because you sure as fuck don't have any intelligence.
      2001 silver/Blk 325 cabby. SOLD
      1988 Blk/Blk e30 factory wide body kit car SOLD
      1992 DS/BLK 325 m-tech II apperance pack cabby SOLD!
      2002 325xit Sil/blk. SOLD
      2012 328i xdrive touring. Wht/blk. SOLD
      2009 135 cabby. monacoblue/blk leather SOLD
      2007 Z4m coupe. Silver grey/black/ aluminum. 1of50
      2010 F650gs twin
      2016 M235i cabby. Mineral grey/Red leather

      Comment


        #4
        very simple job, only awkward because diffs are heavy.

        jack up your car, support with jackstands

        disconnect speedo wires

        remove all 12 bolts holding axles to diff (Having a helper grab and release to e-brake makes this much easier. and remove these before your driveshaft or it will be a PITA to remove the axles)

        remove 4 bolts on driveshaft

        remove diff bushing bolt

        wiggle it free and down


        i have no idea what i am doing with my life

        Comment


          #5
          [QUOTE=dirtbag30;4175132]very simple job, only awkward because diffs are heavy.

          jack up your car, support with jackstands

          disconnect speedo wires

          remove all 12 bolts holding axles to diff (Having a helper grab and release to e-brake makes this much easier. and remove these before your driveshaft or it will be a PITA to remove the axles)

          remove 4 bolts on driveshaft

          remove diff bushing bolt

          wiggle it free and down[/Q

          .............+ remove 4 bolts holding diff to subframe......

          Comment

          Working...
          X