A/T Valve Body Continuous Leak

[Quinthirty]

Hi,

I have an 4HP 22 EH and I had it overhauled some time back. I noticed that the valve body cover leaked so I had it brought down and noticed that the valve cover gasket was a tad small, and proceeded to replace it. When I replaced it, I noticed that after a few months, the leak was there again. Anyway, I just wanted to ask if you could put a liquid gasket to stop it from leaking.

Any suggestions are welcome (except the switch to M/T kind :)).

Thanks r3v!

[cabriodster87]

if the pan is bent it will leak. so check it and replace if needed. overtightening will leak too, it dimples the panrail.