proper tools?

[viali8]

I am thinking about doing the auto to man. swap. can anyone tell me what tools i would need to get the job done. thanks Matt

[rs4pro3]

torx sockets, some long extensions, then just the normal tools, maybe a thin wall 30mm if you plan to change the seals

[viali8]

thanks

[MikeE30325i]

there is a post in "transmission and driveline" that details the swap. though the pics dont work anymore. hope that helps.

[viali8]

yeah, i wish the pics were still there. thanks

[ptownTSI]

you need a complete E torx set from E8 to E16, flare nut wrench set about 9mm i think for the slave cylinder, a slave cylinder and clutch master cylinder since they all use soft brass connections and you must use a flare nut wrench.

[matt]

The hydraulic connectors are 11mm