Speedo sender plug

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • photonn
    Member
    • May 2008
    • 45

    #1

    Speedo sender plug

    I dropped my differential today. While unplugging my speedo sender, the black plastic body of the plug was so brittle it just shattered between my fingers.

    Anyone know a part number for replacement. I have been searching realoem for a while now and cannot find it. It is not on the differential page, because it is part of the harness, I guess.
  • bmw325csi
    R3V Elite
    • May 2007
    • 4045

    #2
    Is it any of these?

    harry/harout

    Comment

    • photonn
      Member
      • May 2008
      • 45

      #3
      In a sense, that is what I am asking you guys :)

      I saw this page. The closest looking plug is probably number 5.
      But, I am unsure as the plastic was so brittle, it literally shattered into
      very small pieces. So, I don't have a plug in my hand to compare to
      the drawing. I only have a hazy memory of what the plug looked like
      while plugged into the socket.

      Comment

      • bmw325csi
        R3V Elite
        • May 2007
        • 4045

        #4
        The only one ive actually seen was on my buddies 318ti. It was more similar to #7. I think you should go to your local dealer and talk with one of the parts guys, If they are anything like out here they will take care of you.
        harry/harout

        Comment

        • Jean
          Moderator
          • Aug 2006
          • 18228

          #5
          There are two types. Here is a picture of it on an early car. I'll snap a picture of one for you from my 89 tomorrow.



          sensor 62 16 1 369 905 looks like this

          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

          Comment

          Working...