Need some help, Might be simple might not.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Vagcycle
    Banned
    • Jul 2008
    • 76

    #1

    Need some help, Might be simple might not.

    Ok, here it goes.

    Alright first off the car RUNs great. But the driveline doesn't feel as good as it should.

    I fire it up, put it in reverse and and when i depress the clutch again after rolling something from the rear (to me it sounds from the rear) clunks.

    If I take the car out of gear without the clutch the something also clunks.

    Now also, I'm starting to believe my clutch is glazed, When the car is cold, the clutch doesn't grab like it should, it's not fully slipping but, chattering as the bentley states. The clutch doesn't slip all the way through the rpm's only when letting it out in first gear it does this. And it only does it at first when its cold for like 6-7 times.

    Could some of this shit be bad mounts or what? I'm really hoping that the driveshaft isnt toast. And I checked my guibo and its seemed to be in decent shape.
  • mattdk318i
    No R3VLimiter
    • Jun 2006
    • 3953

    #2
    your user name is disturbing. check your CSB, it might be part of the problem
    sigpic

    Comment

    • jlevie
      R3V OG
      • Nov 2006
      • 13530

      #3
      You are going to have to get the car up and check the drive shaft & guibo. While it is up in the air, check the subframe bushings, differential mount, half-shafts, and trailing arm bushings. My guess is that one or more of those parts is the cause of the clunk.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment

      • Vagcycle
        Banned
        • Jul 2008
        • 76

        #4
        Thanks, I gotta wait until this fucking rain stops, Rains every SINGLE day over here....

        Comment

        Working...