looking for the E30V8 swap manual

[danval]

hey everyone, does anybody has the e30V8 manual? let me know, thanks

[timmyr77]

I think FrankM E30 sells them

[timmyr77]

Atleast for the m60 swap

[Gertech]

for LS stuff, check with garrettvs.

[danval]

Thank you guys. Im looking for the 5.0 guide.

[filthiest e30]

I would start here

http://www.r3vlimited.com/board/showthread.php?t=307247

The definitive 5.0/302 swap guide, also the do's and don'ts

Sent from my Nexus 7 using Tapatalk

[danval]

I would start here

http://www.r3vlimited.com/board/showthread.php?t=307247

The definitive 5.0/302 swap guide, also the do's and don'ts

Sent from my Nexus 7 using Tapatalk

Hey! Thanks. I actually read the whole thread already. Tons of great info. There are other topics not covered yet, wiring for example. Im not really good or better say knowledgeable when it comes to wiring. Thats why im trying to find a guide of what needs to be done to adapt the 5.0 engine harness to the rest of the e30. So any pointers, tips and advaise is highly appreciated!

[e30_302]

[danval]

Damn!!! So cool! Ive seen a lot of 5.0 swaps on e 30s that actually end up carbed. I know it still can be done (turbocharge a carbed car) but i pretty much have everything ready for turbocharging a fuel injected 5.0. Thats why i would like to keep fi on my e30 5.0... Cant wait!! Lol

[e30_302]

You may want to consider a Megasquirt setup.

[danval]

You may want to consider a Megasquirt setup.

With what i want i can get away with the stock ecu. Actually we are finishing my brothers turbo 5.0. Im not goibg wild so stock ecu is fine for what i want.

[jalopi]

Damn, that makes my engine bay look like shit. Also, I don't know if it's just the picture or what, but what is that intake? Looks different/weird.

So is e30v8.com not selling their swap guides any more?

[e30_302]

Yeah I wish it were mine too. Actually not that would draw too much attention lol. Not sure on that intake myself. Never seen anything like it personally.

[danval]

Damn, that makes my engine bay look like shit. Also, I don't know if it's just the picture or what, but what is that intake? Looks different/weird.

So is e30v8.com not selling their swap guides any more?

It looks like an adapter plate for running obviously single carb. The hemi uses something similar and offsets 2 carbs. Its called crossram. Pretty bad ass setup.

[danval]

I run MS2. If you go that route and have any questions, feel free to ask!

Thanks a lot man. I really appreciate it.