ls1 master cylinder

[apiazza2010]

I have come to the conclusion that the 4 port master cylinder will not work with my swap setup using a universal 7in dual diaphragm booster. I am wondering if any of you know of a master cylinder with only 2 ports (preferably metric) that would work with a universal booster. I cannot use the bmw one as the studs are much larger and set apart than the bmw ones.
Thank you

[shiboujin]

Why not sikky hydroboost for the LS swappage?

[apiazza2010]

I ended up using a GM master cylinder with the same bore as the bmw one and a universal 7" dual diaphragm booster. I have personal hate towards hyroboost (could never get it to work on a FF cobra kit car) and I just did not want to go that route.

[apiazza2010]

For anyone that is interested, this is how it ended up looking: