LS3 480 in a E30 m3 convertable conversion.

[bmk]

Congrats on getting it all done!

[Pootis]

Sounds really good

[ultimateracing335i]

https://www.instagram.com/p/5v0NnTnLGR/

Sent from my SM-G920W8 using Tapatalk

[ultimateracing335i]

Another video.

Sent from my SM-G920W8 using Tapatalk

[ultimateracing335i]

https://www.instagram.com/p/BEqp-iJnLEU/

Sent from my SM-G920W8 using Tapatalk

[Q8y_drifter]

Car looks awesome!

Congrats man. Got any videos?

[ultimateracing335i]

[IMG]http://uploads.tapatalk-cdn.com/20160610/6dea30727d6ebc4786972a9ff4d91639.jpg[/IMG She's finally done!!!

Sent from my SM-G920W8 using Tapatalk

[Q8y_drifter]

I changed to an 89 tank with an in tank fuel pump. The cars much quieter and it's not starved for fuel till under a quarter tank. I'm going to live with that for a bit. Do you have any problems?

Sent from my SM-G920W8 using Tapatalk

I ran into an issue with a couple of the injectors prior to starting the car up so I'm working on fixing that atm (they're stuck open and flooding the chambers, even though I tested them on a Bosch tester ).
Otherwise pump runs, engine cranks and builds good oil pressure (<-- My very first engine build and no oil pressure scared me the fuck out reading LS1Tech lol).

I have an 89 E30 with a single in-tank Walbro 255 pump so hopefully I don't run into any issues.

Will keep you posted and get a start up video once I have my issues sorted.

[tak7]

Beautiful!

[ultimateracing335i]

Fixed those fuel issues?

I changed to an 89 tank with an in tank fuel pump. The cars much quieter and it's not starved for fuel till under a quarter tank. I'm going to live with that for a bit. Do you have any problems?

Sent from my SM-G920W8 using Tapatalk

[Q8y_drifter]

Fixed those fuel issues?

[flyboyx]

this car is really awesome!!! congrats on finishing it up.

i find myself wishing you would have documented the body portion of the build in more detail. for example, how did you get the side skirts to fit correctly? did you just add spacers to the bottom of the skirts or did you modify the top of the skirt so that everything lines up?

also, assuming the car has coupe quarter panels hanging on it, it would be great to know how the quarters were attached along the top of the panel and what was done in the rocker panel area?

i am building a cabrio m3 out of an m3 parts car. i have been developing a game plan for this but it would be great to get as much info as possible.

i am excited about the sikky hydroboost option. this thread is the first i have heard of this. i did some research and it appears the hydroboost unit is actually quite universal, was installed on many domestic models, and very compact. much better than factory bmw hydroboost parts. i am pretty sure the unit can be found in a junk yard and the rest of the parts fabricated to make this work with a bmw v8.

[Reyhan335]

man that's awesome. im putting a ls in my car too! idk what's cooler that we are both having red e30s with ls motors or that you have a 335 too! haha nice build man!

[ultimateracing335i]

Sent from my SM-G920W8 using Tapatalk

[ultimateracing335i]

Sent from my SM-G920W8 using Tapatalk