M60/62 Turbo kit....in the works

[driftingminor913]

Throttle to warm it up, got another pic of the flywheel

[Tjabo]

Cool, how much variance do you have between cold start and warm idle? Or do you just give it some throttle to help it warm up?

[driftingminor913]

Control it manually with the adjustment screw

[Tjabo]

Why did you weld up your IAC valve hole? Do you have another means of idle speed control, or go without?

[driftingminor913]

[driftingminor913]

With the start of my new buisness www.jayfabwerks.com I have been busy working and making other stuff for people. But I have been able to touch my motor a bit. Getting my driveshaft lengthend since the motor has been moved forward also after doing the manifolds I needed to get them decked since they wrapped a bit when welding. And finally I'm still waiting on my custom flywheel to be finished and it's close!

[goarmy]

Any 2016 updates?

I want to see more of this..

[driftingminor913]

Idk honestly, I'm feeding it ethanol n 10psi

[blwn24v]

what do you think it'll put down on race gas

[driftingminor913]

Nice! That's about what I did

[zogs]

you will have bad balance on the axes and no space, with this oil pan modification, + turbo in front of the engine.
Here is my oil pan, I made everything to the max, so that engine is maximum as possible to the back.



best of course would be X5 oil pan

[driftingminor913]

Sorry for the lack of updates, been trying to get my welding business rolling in more work. But I got my hands on another engine so that I can builds more manifolds since i have been getting a lot of requests on them.

Also got a couple members to send me their V8 oil pans for modification, don't be afraid to hit me up if you want something made or need something welded Www.Facebook.com/JayFabWerks

[driftingminor913]

Oops? Lol

[blck325is]

As if my lust for a regular v8 wasn't enough, now you go and do this...

[driftingminor913]

HAHAHAHAHAHA I will think about doing that. But a little update the machine shop still isn't finished with my flywheel. They were actually working on it then the machine went down, but I did get a call from a local company that does clutch work. So when I first swapped the motor into my e30 I bought a cheap eBay F1 racing stage 1 unsprung clutch kit. Which was OK for driving around n taking a few beatings here n there BUT I noticed after a while it would start to slip at the top of any gear. So I took it to this local shop n told them what I was building n they said they will take care, I'm pretty sure this will
Hold up to the power I'm putting down and its quality work. What do you guys think?