M60/62 Turbo kit....in the works
Collapse
X
-
Turn the heads around and make it a hot vee engine. Turbo is in the valley, problem solved!
-
M60/62 Turbo kit....in the works
I built my M60 E30 and I can tell you that with the pipeline your are making there's no way it will fit. You might be able to fit a small turbo on the passenger side but you can forget on the drivers side. Turbo setups have been done in the past but this engine will run much better with a SC set up and will be a lot more reliable too.
Sent from my iPad using TapatalkLeave a comment:
-
-
-
Hmmmmm well when I get a clean chassis I'm going to test fit in a e30 but I feel like it will still fit in a e30Leave a comment:
-
I hate to be the one to say it, but I very much doubt that will fit in the engine bay. It'll be very tight in an E39, let alone an E30. Most people go with superchargers as opposed to turbos for that reason. Perhaps you could look at a remote mount or split turbo system?
Hate to be the downer :( Looks like a cool project.Leave a comment:
-
-
Was going to do a GT45 BUT a buddy is giving me a deal on this prescion 7675Leave a comment:















Leave a comment: