-
Got rid of the R32 radiator and replaced it with a big ass griffin (best mod I've done yet).
-
Here are a few things I did this spring...
Wideband install and painted exhaust considering it's only mild steel.
Changed out diff from 3.25LSD to 4.10 LSD, refreshed the axle shafts.
Leave a comment:
-
A view of the harness as I was finished making it. Fuse block and PCM rough install.
Installed a non airbag wheel.
Leave a comment:
-
Here's how to adapt an airbag column :D
Fabbed my own dual 3" exhaust
Leave a comment:
-
Heck yeah. About time you made a build thread / I'm already done picture blog
Sent from my iPhone using TapatalkLeave a comment:
-
1990 325is LS1 swap photo blog
I completed this swap last year and I continue to make improvements and tinker with the car for fun. I thought it would be nice to share with the r3v community and perhaps help others with current/future swaps. I am copying some of the info from another BMW forum where I originally had a build thread.
A little bit about the powerplant:
LS1 5.7L V8
T56 6 speed transmission
Spec stage 3 clutch
MS3 Cam with supporting dual valve springs, titanium retainers, and push rods from texas speed. LS7 hydraulic lifters, stock crank, rods, pistons, and rockers. Stock 853 cylinder heads.
LS6 intake
Ported throttle body
Leave a comment: