So from what ive been reading, this is the pin out for a square model
EARLY / SQUARE:
Pin Colour Function To
1 Blue Charge light pin 16 blue plug inst cluster
2 Green/Yellow Static oil level Pin 16 check panel
3
4 Brown Temp gauge pin 26 blue plug inst cluster
5
6 Green/White Oxygen sensor relay Fuse 9
7 Green/Purple fuel pump relay fuse 11
8 White/Black Start Ignition Switch
9
10 Live power from ignition unfused
11
12
13
14
15 Black/Green Unloader relay pin 1 blue plug inst cluster
16 Brown/Green Oil Pressure light pin 18 blue plug inst cluster
17 White/Green Reset service lights pin 22 blue plug inst cluster
18
19
Late model (circular) have a static and a dynamic oil level pin, from what I see, there is only a static in my harness.
How would I go about wiring in a dynamic for my swap?
EARLY / SQUARE:
Pin Colour Function To
1 Blue Charge light pin 16 blue plug inst cluster
2 Green/Yellow Static oil level Pin 16 check panel
3
4 Brown Temp gauge pin 26 blue plug inst cluster
5
6 Green/White Oxygen sensor relay Fuse 9
7 Green/Purple fuel pump relay fuse 11
8 White/Black Start Ignition Switch
9
10 Live power from ignition unfused
11
12
13
14
15 Black/Green Unloader relay pin 1 blue plug inst cluster
16 Brown/Green Oil Pressure light pin 18 blue plug inst cluster
17 White/Green Reset service lights pin 22 blue plug inst cluster
18
19
Late model (circular) have a static and a dynamic oil level pin, from what I see, there is only a static in my harness.
How would I go about wiring in a dynamic for my swap?