I have misplaced my Bently manual and I am in the process of changing my power steering fluid. I want to flush out the entire system. I want to unhook the incoming line to the resevior (spelling) and hook a hose to it with an adapter and run four quarts through the system to flush it out. I am not sure which line the fluid comes in at? Is it the one in the bottom of the resivior with the big hole in the front or the one with the little hole in the back. I thought I had it right but fluid shot up from the filler hole on top when I started the car so I am guessing it is the smaller back hole. I just want to make sure. Thanks. I hope some of you guys on the west coast are still up.
Comment