Hey guys!
Replacing my late model bumpers today. Front one, cake. undid the 2 bolts and the dropped right out and the bumper slid off. The back, different story...
So tried to undo the 2 bolts on the bottom, with no luck. Ended up with 2 bolts stripped to sh*t. Well since my old bumper was trash anyway, i took the cover off, cut around the shock through the fiberglass to access the nut at the top of the bolt. Undid the nut, expected the bolt to slide right out. None such luck.
MY QUESTION:
Is the sleeve on the rear shock, threaded?!? The front IS NOT.
Thanks!
Replacing my late model bumpers today. Front one, cake. undid the 2 bolts and the dropped right out and the bumper slid off. The back, different story...
So tried to undo the 2 bolts on the bottom, with no luck. Ended up with 2 bolts stripped to sh*t. Well since my old bumper was trash anyway, i took the cover off, cut around the shock through the fiberglass to access the nut at the top of the bolt. Undid the nut, expected the bolt to slide right out. None such luck.
MY QUESTION:
Is the sleeve on the rear shock, threaded?!? The front IS NOT.
Thanks!
Comment