My new camshafts (S50) units with the TMS chip

[M-technik-3]

No to set out to install them. Dam the tool is expensive, I might just pay to have them installed as the tools are 300 for them. and that is not all the stuff I need.

[Fred]

You mean the cam locking tools? Yeah, those are really up there, though I thought you could borrow them from Koala Motorsport.

[M-technik-3]

You mean the cam locking tools? Yeah, those are really up there, though I thought you could borrow them from Koala Motorsport.

Yea probably so if you bought stuff from them. My schedule is hectic right now anyway. Flying tomorrow till Monday and then again on next Thursday which doesn't leave alot of room for car stuff.

[rwh11385]

I'd say:
1) Dan owes you one.
2) Bavarian Performance Group ought to have one of those tools.
3) Working "with him" at the shop might fly.

[Stu]

Greg, got any tech friends at the dealer? You may be able to borrow the cam-locking tools and the lifter suction-cups. I had to do this once to replace a noisy lifter. The lifter suction cups are ingenious and save a LOT of time/cussing.

[M-technik-3]

Greg, got any tech friends at the dealer? You may be able to borrow the cam-locking tools and the lifter suction-cups. I had to do this once to replace a noisy lifter. The lifter suction cups are ingenious and save a LOT of time/cussing.

Yes the shop service manager that wanted to sponser me to STEP. I helped him with a Chrysler engine a couple weeks back.

I didn't want to go using up my favors yet.

[Rob]

cant install the cams? better sell the car to langsten...... :P

[M-technik-3]

cant install the cams? better sell the car to langsten...... :P

Not that I can't is that I don't own the tools needed yet. Bought them and the chip for $450 shipped and it was a bargin if you have seen TMS price. I dropped cams off for cleaning and magnafluxing today at machine shop.

[DanGillan]

call me at bavarian performance group (1-781-279-4444) we'll hook you up, call us tomorrow after noon time, you the man, later...

[M-technik-3]

Be gone for the weekend. Been working on my T.O. right now.

[DanGillan]

that's even better, drop off your car at the shop, we'll get you a cheap rental and the cams will be in by the time you get back maybe :) serk`Z¡ly, give us a call

[Ryan Stewart]

Greg hold off on buying the chip until you find a set of injectors. Try to go above 17.5.

I have a set of 24 sitting on my bench awaiting my camswap.

[M-technik-3]

Greg hold off on buying the chip until you find a set of injectors. Try to go above 17.5.

I have a set of 24 sitting on my bench awaiting my camswap.

I already have the chip, It cam with the pair for the price. That's why I jumped on em.

[Ryan Stewart]

Was it part of a package? If its turners I think they come with 19lb injectors in thier kits.

It would be nice to be running a low duty cycle.

[M-technik-3]

E36 325i Sport Camshaft Kit
Part #: 11311403791KIT
Applications: 1993 - 1995 325i (E36)
This kit consists of : 1 pair of factory M3 camshafts and a custom chip. This upgrade will work on all 1993-95 325i's. This kit installed with NO other parts will boost horsepower and torque of your 325 without drivability loss (Most 325's gain 25 horsepower and 24 lb/ft torque)
Price: $1,249.00

This is what I got.