Announcement

Collapse
No announcement yet.

Part number confirmation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Part number confirmation

    I stupidly broke a connector for the fuel injector wiring harness and am ordering another to splice it on correctly. I'm %90 sure I have the right part but I wanted confirmation from anybody that would know.

    Part # 61 13 1 357 705



    Is this correct? The plugs I'm talking about are on the engine wiring harness, the 6 fuel injector plugs, two wires/connectors going into each. While replacing all the plug housings, I snapped a connecter and that's what I'm looking for as far as a replacement. It's only like 30 cents so I could do trial and error, but knowing for sure would save time and mystery.

    #2
    For the m10 and not m30 harness?

    I think housing is 12 52 1 706 121? Or are you looking for the metal pin itself?

    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

    Comment


      #3
      for the m30 i think. I think he meant #1 on your link, his goes to the spades them self, not the plug.

      Comment


        #4
        Originally posted by Jean View Post
        For the m10 and not m30 harness?

        I think housing is 12 52 1 706 121? Or are you looking for the metal pin itself?

        http://bmwfans.info/parts/catalog/E3...g_connections/
        Looking for the metal pin itself. I ordered the plug housings a while ago and picked them up today. Not but 10 minutes ago I was replacing them and when pulling one of the metal pins the top of it snapped off so I'm looking for the correct number.

        I ended up ordering 61 13 1 357 705 so hopefully it comes up. Money isn't really anything to be wasted ordering these things at 30 cents each, just time.

        Comment


          #5
          If you have an electronics store near by (not Radio Shack), they make have them in stock. Some (not all) are pretty standard pins etc and cost no more than 5 cents...

          Good luck
          Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



          OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

          Comment


            #6
            oH, I'm wrong then.

            Comment


              #7
              Originally posted by Jean View Post
              If you have an electronics store near by (not Radio Shack), they make have them in stock. Some (not all) are pretty standard pins etc and cost no more than 5 cents...

              Good luck
              I considered that, I have a Marvac about a mile from here, but I thought it'd be somewhat custom. Probably is a standard connector like you said. Oh well! I'll find out soon enough. Thanks for the help

              Comment


                #8
                You won't buy anything that is not from the dealer I assume.

                Comment


                  #9
                  Originally posted by Farbin Kaiber View Post
                  You won't buy anything that is not from the dealer I assume.
                  No I totally will. But now that I've already ordered them from the dealer there's no point in wasting time to make a trip to an electronics store only to make the trip to BMW to pick them up the next day. If I ordered the wrong part from BMW i'll go over to the electronics store.

                  Comment


                    #10
                    for those who care part # 61 13 1 357 705 was in fact the correct connector

                    Comment

                    Working...
                    X