If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm buying some sport vinyl seats, the thing is they don't come with sliders, can I use the sliders from my seats(non sports)?
How do I remove/install?
i dont know if it will work or not, i just know when i was building up my seat set, the non sport sliders were different from the sports, i never really tried to make it work, maybe someone else will chime in here
on my sport seats, the sliders were physically thinner than the non sport, the mounting locations (to the floor) were also a different thickness, and they swiveled differently, i say try it, and let us know, i know on mine it didnt work
I used the seat tracks ( this is what we are reffering to correct?) from my stock seats('84) and they fit right up with the sports from a 318is for me.
Should work. There are 4 bolts that hold the sliders to the seat. One of them also holds the seat belt buckle in place. Once you remove that one, you'll find hte other 3 easy enough as they are the same size.
IIRC there might also be some tube pins holding them in place. If so, those come out by just pushing in the tab on the outside edge and pushing through.
Install shold just be the reverse.
A great pleasure in life is doing what people say you cannot do- Walter Gagehot
Should work. There are 4 bolts that hold the sliders to the seat. One of them also holds the seat belt buckle in place. Once you remove that one, you'll find hte other 3 easy enough as they are the same size.
IIRC there might also be some tube pins holding them in place. If so, those come out by just pushing in the tab on the outside edge and pushing through.
Comment