What other good maintenance items to toss into the e30...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dinanm3atl
    R3V OG
    • Feb 2007
    • 7305

    #1

    What other good maintenance items to toss into the e30...

    So as some know I bought a pretty nice 2 owner e30 and working on maintaining to my standard and upgrading. I wanted to see if I missing anything as I did forget one item and it is not in my cart but if there are some others to pick up I will do that as well...

    Installed:
    IE3 Springs
    Bilstein Sports
    Front Strut Mount/Bearing
    Rear Shock Mounts w/ Reinforcement Plates
    Driver Side Wheel Bearing(PO Did Passenger less than 12 months ago)
    Tie Rod Assemblies w/ locking tabs and alignment
    *Previous Owner did Control Arms/Bushings less than 12 months ago*

    Waiting on Install:
    Front Brake Disc
    Front Brake Pads - Axxis Ultimate for Street Use
    Rear Brake Disc
    Rear Brake Pads - Axxis Ultimate for Street Use
    4x Brake Disc screws
    Front & Rear Brake Pad Sensors
    Center Support Bearing
    Guibo
    Z4 2.5i Lever
    Full Shifter Rebuild(Bushings/bearings/mounts/etc)
    5sp ZHP Weighted Knob
    Trans Mounts

    Waiting to Order:
    Sway Bars Front and Rear
    Strut Brace - Front
    Shock Tower Brace - Rear

    In Cart:
    Motor Mounts


    So what else should I grab while I am in there? I think at this point I have knocked out what I can remember! Anyone else want to say "Hey I would also do this..." fire away!
  • whiltebeitel
    R3VLimited
    • Apr 2007
    • 2098

    #2
    Timing belt/water pump if it's an M20. Make sure you put in reinforcements with those sway bars, rather have a little too much strength than a broken mounting tab.
    '89 325i track sloot
    '01 530i daily

    -Enginerd

    Comment

    • dinanm3atl
      R3V OG
      • Feb 2007
      • 7305

      #3
      Originally posted by whiltebeitel
      Timing belt/water pump if it's an M20. Make sure you put in reinforcements with those sway bars, rather have a little too much strength than a broken mounting tab.
      Yah I will get those for sure.

      Already done the timingbelt/pump and all of that jazz. Has a fully rebuilt timing/ignition/plugs/etc.

      Comment

      • whiltebeitel
        R3VLimited
        • Apr 2007
        • 2098

        #4
        Well, in that case, caber plates would nicely round out the suspension. If nothing leaks, it sounds pretty solid!
        '89 325i track sloot
        '01 530i daily

        -Enginerd

        Comment

        • dinanm3atl
          R3V OG
          • Feb 2007
          • 7305

          #5
          No leaks and cold cold cold A/C ;)

          Comment

          • whiltebeitel
            R3VLimited
            • Apr 2007
            • 2098

            #6
            /jealous.
            '89 325i track sloot
            '01 530i daily

            -Enginerd

            Comment

            Working...