If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
14lb Bosch Design III injectors are stock, the 19lb M30/M50 injectors are common and represent a minor upgrade. I'd stay stock unless you are doing major work.
Personally, while you're in there, I'd do M30 AFM and M30 injectors. The computer won't respond as well to one or the other due to the closed loop tuning, IMO.
Comment