Announcement

Collapse
No announcement yet.

Looking for someone who does lathe work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Looking for someone who does lathe work

    Need some pieces cut. I have the dxf's. Small pieces. .940" x .560" ea.
    Ma che cazzo state dicendo? :|

    #2
    Go to your nearest machine shop why bother asking here?

    '89 Alpine S52 with goodies

    Comment


      #3
      Well it seems you've never worked with a machine shop.

      I'd rather give it to someone who wants to make a buck on the side that works in a lathe shop. Its a 7 dollar part from the dealer but I want mine made out of titanium not cast aluminum. I have the material, but it'll cost me a min of 1 hour lathe time and a 90 dollar setup fee to do it at a local shop.
      Ma che cazzo state dicendo? :|

      Comment


        #4
        yikes, titanium is gonna be a bitch. but i guess if someone here works at a shop that uses ti often it wont be as much of a problem. good luck
        Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

        Originally posted by TimKninja
        Im more afraid of this thread turning into one of those classic R3v moments, where Pizza gets delivered.

        Comment


          #5
          What part is it? And why Ti rather than steel?

          Comment


            #6
            I'm also interested to find out what part it is.

            1987 325is: 495whp/400ft-lb
            UPDATED 03/12/10!: RB26DETT Swapped E30

            Comment

            Working...
            X