Anyone got a part # for Speed Sensor Plug

[M5wanaB]

I have searched and searched and have not been able to find a definite answer. So, does anyone know the exact part # for the plug that goes into the Speed sensor on the Differential? The plastic on mine was very old and brittle and has just about disintegrated. I just need the plastic plug housing. let me know, If not I will just buy the 6-7 ones I have found that could be it as they are only a couple bucks each.

[M5wanaB]

Someone must know.

[dashboardmonkey]

did you check on realoem

[M5wanaB]

did you check on realoem

you know it. There are a quite a few different plugs on there, thats the problem. There is no description given to tell which plug is for what. It looks close to the same as the plugs used for euro smiley's but I cant tell for sure.

[AndrewBird]

03 WIRING SPEEDOM.,SENDING UNIT 1 61121372739 $40.81

http://www.realoem.com/bmw/showparts.do?model=BB13&mospid=47326&btnr=61_0495&hg=61&fg=10

Pretty sure that is it.

[M5wanaB]

03 WIRING SPEEDOM.,SENDING UNIT 1 61121372739 $40.81

http://www.realoem.com/bmw/showparts.do?model=BB13&mospid=47326&btnr=61_0495&hg=61&fg=10

Pretty sure that is it.

Im really not looking to replace all the wiring too. just the plug itself. It should be one of these. See how there are multiple part #s for 6, I think that it is one of them or 5.

http://www.realoem.com/bmw/showparts...34&hg=61&fg=15

[AndrewBird]

Well, crawl under and see what it looks like and then get the right one.

[M5wanaB]

Well, crawl under and see what it looks like and then get the right one.

another part of the problem as stated in the original post is that the plug has mostly disintegrated. There is very little left of it and it is barely holding on as it is.