Front brake line..

[Julien]

I am in the process of installing SS brake lines and i ran into a little issue... I completely
stripped the 11mm but on the front driverside brake line.. i tried putting vis grips on it to no avail.. any other ideas? perhaps replace the line from the MC to the wheel well?



Julien

[kowalski]

you could grind 2 flat spots and put the vice back on and give it another shot, how'd you strip it anyways? or cut the line and reflare it, but for that you need to buy a brake flaring kit. i dont htink they're that much money tho

[Julien]

good call.. i'll try that out

[kowalski]

alrighty well good luck to ya.

[T.Dot E30]

heat it up with a propane torch.

Should free it up enough to get it off with a vise grip.