Just broke motor mounts

[Zaun]

Wow...Gotta say love the mounts. So much smoother and i dont really notice it shake more. Only time i felt it really shake is if your rpms drop to like 600.

[Zaun]

cool, well i hooked up something to pull the motor the way i wanted it and slowly got it down in place. Got everything tightened up. did both your mounts tighten the same amount or did one have less threads showing then the other? Just pulled the radiator hose it does not match the one the auto part store gave me.....gonna see if i can make it work

[caliGreen]

what i did was the passangers(make shure to put exhaust shield on it? just incase of heat)
then i just barly bolted it.. lowerded the motor and did the otherside till there were lined up.
i also had a friend push the motor to the drivers so it can fit.

[Zaun]

Well got the old out but cant seem to get the motor lined up. one the drivers side its about 1/4- 1/2 an inch off forward, and on the pass side its about 1-2 inches off

[caliGreen]

sicwidit. let me know how it goes.

[Zaun]

Oh btw called usps and chewed there asses out. Made them promise to reimburse me tomorrow if they couldnt find them today. 3 hours later i had it hand delivered by the postmaster or what ever his title is.

[Zaun]

lol well hmmm my bolts on my old ones are freaking stuck on..Tried with impact wrench to break it free and no go yet...Gonna soak it with some kroil and try a fresh battery here in a few.

[caliGreen]

Just weld the engine to the subframe.

haha that is too gangstah

[b*saint]

Just weld the engine to the subframe.

[caliGreen]

i dont know why people gotta hate.

[Zaun]

your thread about breaking your motor mounts and asking for tips on replacing them brings nothing to this forum...

Your still not bringing into this thread...oh wait are you trying to troll. thats so cute... Continue on poor slop

[Zaun]

finally got done with everything.. Wow with these mounts i notice so much change. when shifting ; much smoother not motor jerks. when just gassing motor feels much intact w/ chassis and again smoother feel..

only thing is when adjusting clutch and gas or when i turn my steering wheel(sometimes brings up rpm like a little little.. i the steeringwheel / other parts of my car vibrate(not shake) for a lil sec..

but in the end im totally happy with it.. every easy to install
just had a cherry picker lift it up and put the new ones in and tighten it and thats it.

Sweet i am excited just waiting for mine to become unlost in the mail or them payout so i can order some new ones. Its sad to see my car sitting in the garage unusable.

[lennon]

your post brings nothing to this thread.

your thread about breaking your motor mounts and asking for tips on replacing them brings nothing to this forum...

[caliGreen]

finally got done with everything.. Wow with these mounts i notice so much change. when shifting ; much smoother not motor jerks. when just gassing motor feels much intact w/ chassis and again smoother feel..

only thing is when adjusting clutch and gas or when i turn my steering wheel(sometimes brings up rpm like a little little.. i the steeringwheel / other parts of my car vibrate(not shake) for a lil sec..

but in the end im totally happy with it.. every easy to install
just had a cherry picker lift it up and put the new ones in and tighten it and thats it.

[caliGreen]

just installed but.. now have to replace hoses. and since i was down ther i took my powersteering stuff out to see were it was leaking..

didnt know if it matterd but.. i put the nut on the top.

so right after im done ill will post.. i just hoped that my motor didnt overheat and messed something up