anyone using an aftermarket external fuel pump?

[mcgrath]

I'm going to replace my fuel pump soon, and I was thinking of going with an aftermarket pump. I just wanted to know if anyone has done this before and what there thoughts are on doing this? Currently I am looking at MSD's fuel pump that summit racing has. Here is a link to the pump on summit's site.

http://store.summitracing.com/egnsearch.asp?Ntt=msd+fuel+pump&N=4294836965&Ntk=KeywordSearch

Any thoughts welcome.

Thanks,
Steven

[DaN]

You just doing it because its cheaper than the stock one?
That one will probably work just fine.

[mcgrath]

pretty much, as long as the flow rate isn't less than the stock pump. I don't know the rate for the stock pump so I couldn't compare.

[draculia]

i have an inline walbro 255 hp going in when i put the fuel cell in. you could run an intank walbro, i would go with a 190. there is a little bit of modifying that needs to be done to get it in there securely though.

[mcgrath]

I looked at both the 255 and the 190. I like the prices on them. I assume that if I run a pump like this then I can do away with the external pump?