Announcement

Collapse
No announcement yet.

Not sure...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Not sure...

    Ok so I installed new driveshaft and guibo, and actually did it twice because the first new shaft was not balanced correctly and yes, I did use a new guibo both times. Now I experience a vibration at around 60mph to about 80. Its not loud or very violent, just enough to message my back through the seat. Loose bolts?

    I also know that my control arm bushings are pretty well shot...could they be the source of the vibration although there is no vibration through the steering wheel?
    sigpic

    #2
    Are your wheels balanced? Missing any wheel weights?
    cars beep boop

    Comment


      #3
      Csb?

      Comment


        #4
        That was the first thing I checked. All the weights were in place...having them rebalanced soon though..
        sigpic

        Comment


          #5
          Originally posted by Danny View Post
          Csb?
          csb was also installed new..guess i will get under tomorrow and see if there is any play.
          sigpic

          Comment


            #6
            update...i can get up to about 60-70(where the vibration begins) and when I hit the brakes I get a lot of clunk noises from my front wheels and brakes...so I figure the vibration is from the control arm bushings...?
            sigpic

            Comment


              #7
              anyone??
              sigpic

              Comment


                #8
                ANY FUCKING ONE HAVE A CLUE?

                Jack up the car and take a 3' pry bar and move shit around till you find something.
                Ma che cazzo state dicendo? :|

                Comment


                  #9
                  Based upon the braking I would guess lcabs as well. Take a look under the car.

                  Edit: I agree with b*saint. Get it to a shop or get dirty.

                  Comment


                    #10
                    my first thought was the drive shaft being reinstalled 90 dergrees off but since you said you got a new one. i have no idea
                    sigpic

                    Comment

                    Working...
                    X